Features

• Specially developed for the Australian Exhibition Industry to be compatible with the floor tiles commonly used that have an additive to reduce their slip characteristics
• A differential coat weight of a special synthetic rubber adhesive with 70% better adhesion on the liner (carpet tile) side
• A very tough and tightly woven cloth backing. Although hard to hand-tear its structural strength ensures it lifts without breaking and the adhesive will remain well keyed to the cloth backing
• A heavy weight, siliconized white paper release liner not prone to tearing on removal
• Sold in 25 Metre length, the standard width for the exhibition trade tends to be 18mm but any width can be cut and a wider width generally recommended for edging applications to prevent trip hazards
• Highly credentialed Japanese manufacturer

Benefits

• Can be used on both concrete, stone and wooden surfaces (not recommended for carpets as too low a tack—try K5325 or others)
• Removes without breaking or leaving a residue (Note this applies to stable surfaces but testing always recommended prior to use as any surface treatment can effect
  performance)
• Easy to lay and strip liner—ideally used in its 25 Metre length so that do not need to hand-tear the role but scissors or a safe bladed knife may be required
• Designed to stay stuck to the exhibition surface when remove carpet tiles (this allows the tiles to be stacked without residual adhesive left on them and then finally the tape is lifted — even with forklifts driving over the carpeted surfaces it should lift without breaking
• Approved for use (some locations exclusively) at major Exhibition Venues around Australia—contact us for details